Scientific Atlanta DPX120 Operations Instructions download pdf (Page 9)

WebSTAR Cable Modem Front Panel

1 POWER Illuminates solid green to indicate that power is being applied to the cable

modem

2 PC Illuminates solid green to indicate that an Ethernet/USB carrier is

present

Blinks to indicate that Ethernet/USB data is being transferred between

the PC and the cable modem

3 DATA Blinks to indicate that data is being transferred between the modem and

the cable network

4 CABLE Illuminates solid green when the modem is registered on the network and

fully operational. This indicator blinks to indicate one of the following

conditions:

• The cable modem is booting up and not ready for data

• The cable modem is scanning the network and attempting to register

• The cable modem has lost registration on the network and will continue

blinking until it registers again

• Blinks very slowly (once every 5 seconds) to indicate that Cable Modem

Access Protection is enabled

Note: Once the cable modem is successfully registered on the network, the

POWER and CABLE indicators illuminate continuously to indicate that the

cable modem is active and fully operational.

See Detailed Front Panel Indicator Functions later in this guide for more

information on front panel indicator functions.

Front Panel Indicators

POWER

DATA

CABLE

T9916

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

No comments

Scientific Atlanta DPX120 Operations Instructions Page 9